School of Computing and Engineering – Final Year Project

Abstract

Enter your abstract here.

The Abstract is a self-contained summary of the whole of your report. It should therefore be written last and is usually limited to one or two paragraphs.

It should contain:

            •           An outline of what you investigated (as stated in your title)

            •           Why you chose to look at that particular area with brief reference to prior research done in the field.

            •           Your experimental hypothesis (prediction of what the results will show)

            •           A brief summary of your method.

            •           Your main findings and how these relate to your hypothesis.

            •           A conclusion which may include a suggestion for further research.

Acknowledgements

Enter acknowledgements here. Acknowledge those that have assisted you in your project.

Contents

1          Figures and Tables     5

1.1       List of Figures 5

1.2       List of Tables  5

2          Introduction    6

2.1       Aim and Objectives    6

2.1.1    Aim     6

2.1.2    Objectives       6

3          Literature Review       7

4          Research Methodology           9

5          Design and Implementation   10

6          Result and Analysis    11

7          Discussion and Conclusion    12

8          References      13

9          Appendix        14

9.1       Project Progress Form 1         14

9.2       Project Progress From 2         14

Figures and Tables

To insert List of Figure and Tables make sure you have used Caption for your figures and tables. This is shown in Figure 1.

List of Figures

REFERENCES  Insert Caption

Figure 1 – inserting figure caption

List of Tables

Introduction

The Introduction chapter should include your motivation for conducting the research. Identify the problem by providing some background to the subject under study. Introduce the reader in more detail to the subject area under study. Expand the Abstract and explain in more details what have been presented in the reported chapters briefly layout of the report (Alani, 2017)

Aim and Objectives

Aim

An aim is general statement of intent and are written in general terms. Aims should be identified/set realistically (achievable within the available timeframe). The aims then should be broken down into smaller and achievable chunks (Alani, 2017).

Objectives

An objective is a descriptions of an intended outcome, written in specific terms. An objective should be SMART (Alani, 2017):

            •           Specific: Avoid setting unclear or vague objectives; be as precise as possible

            •           Measurable: Be clear how will you recognise when you have achieved your goal. Using numbers, dates and times is one way to represent clear objectives.

            •           Achievable: Setting yourself unfeasible

            •           Realistic

            •           Time bounded

Literature Review

The background to the problem under study, providing the previous work carried out by the others in the field, with appropriate references. Avoid inclusion of information that are not in direct relevance to your research/study. Be as comprehensive as possible. Be as objective as possible. Write a summary of your findings (identified problems, advantages and disadvantages. This should lead you to set the aims and objectives of your study (Alani, 2015).

Write your Literature Review by following these steps:

            •           Focusing on Aim and Objectives

What is my project about?

            •           evaluating current techniques/systems/research idea?

            •           innovating a new system/method?

            •           developing the current system in place?

            •           proposing a list of principles to be applied?

What is the current system/method/technique?

            •           Who has done the same work?

            •           What did they say/achieved/concluded?

            •           Can I follow/add/test/criticise their work?

            •           How will my work be different to their work?

            •           Research question(s)

            •           What is my research question(s)?

The answer to your research question would be the conclusion at the end.

For example:

Research title: Educational game for students with hearing impairment

Research Aim: to investigate whether the use of serious games is an effective learning tool to aid and enrich deaf children’s learning experience…

Research question:

What are the implications/effects of using serious games in education?

What are the implications of using serious games for educating deaf children?

            •           Discovery

Stage 3: Find the article/system

In view of Stage 1 & 2 you search for:

Article: Read abstract and conclusion first; If the article is relevant, check the reference list

System: Who is the owner? Who are the users? Make contacts

            •           Write

            •           Write the rough draft

            •           Improve the rough draft

            •           Write the final version

Research Methodology

This section should reflect on the set objectives of your report.

Describe every step of How you carried out your research/development in sufficient details so that the reader could exactly replicate your procedures if they wanted to.

It should provide detailed information about your experimental design, sampling methods, participants, equipment (apparatus/materials) and the overall procedure employed thoroughly and effectively (Alani, 2017).

Design and Implementation

This section specifies the design model with detailed description of the design process of the artefact to include the architecture, components and data of the system. The chapter should include any conceptual model used with a defined list of system requirements before providing a full description of the final design.

Result and Analysis

The presented results should clearly convey the findings of your experiment, design, validation of methods and procedures and etc. It should reflect on the set objectives of the project. It should be remembered that this section is the basis of your next chapter (Discussion) and contains the main body of your project report, therefore: Present your data and findings effectively and in a summarised manner (graphs, tables, equations, design models, and etc.); Comment briefly on the significance of your results or design reflecting on the existing alternatives or similar products (Alani, 2017).

Discussion and Conclusion

This chapter is probably the most important part of your project report and it should focus on: To help the reader to understand the relevance of your work (research/design) to previous and further work in the field; It should clearly reflect on the reported results and the presented analytical work; It should clearly relate to the information provided in the earlier chapters (Introduction and Objectives); It should compare your findings and development with the results and findings referred to in the Literature Review; It should contain a main summary of the results and an interpretation of these results in relation to your aims, predictions or hypothesis (supported or rejected); It should state clearly; the implications of your findings or design, limitations or associated problems, and have also considered ideas for further research in that field (Alani, 2017).

References

Alani, A. (2017) Final Year Projects [PowerPoint Presentation], Available at: https://online.uwl.ac.uk/webapps/blackboard/content/listContentEditable.jsp?content_id=_1880645_1&course_id=_91248_1&mode=reset  (Accessed: December 2017)

Use Harvard Style by following the guideline available on UWL library website:

http://www.uwl.ac.uk/library/finding-and-using-information/referencing

On the above web page click on Cite Them Right Online link.

For more information read lecture materials given in week 7 on Blackboard.

Appendix

Project Progress Form 1

Project Progress From 2

Get solved or fresh solution on School of Computing and Engineering – Final Year Project and many more. 24X7 help, plag free solution. Order online now!

Universal Assignment (March 14, 2026) School of Computing and Engineering – Final Year Project. Retrieved from https://universalassignment.com/school-of-computing-and-engineering-final-year-project/.
"School of Computing and Engineering – Final Year Project." Universal Assignment - March 14, 2026, https://universalassignment.com/school-of-computing-and-engineering-final-year-project/
Universal Assignment October 10, 2022 School of Computing and Engineering – Final Year Project., viewed March 14, 2026,<https://universalassignment.com/school-of-computing-and-engineering-final-year-project/>
Universal Assignment - School of Computing and Engineering – Final Year Project. [Internet]. [Accessed March 14, 2026]. Available from: https://universalassignment.com/school-of-computing-and-engineering-final-year-project/
"School of Computing and Engineering – Final Year Project." Universal Assignment - Accessed March 14, 2026. https://universalassignment.com/school-of-computing-and-engineering-final-year-project/
"School of Computing and Engineering – Final Year Project." Universal Assignment [Online]. Available: https://universalassignment.com/school-of-computing-and-engineering-final-year-project/. [Accessed: March 14, 2026]

Please note along with our service, we will provide you with the following deliverables:

Please do not hesitate to put forward any queries regarding the service provision.

We look forward to having you on board with us.

Most Frequent Questions & Answers

Universal Assignment Services is the best place to get help in your all kind of assignment help. We have 172+ experts available, who can help you to get HD+ grades. We also provide Free Plag report, Free Revisions,Best Price in the industry guaranteed.

We provide all kinds of assignmednt help, Report writing, Essay Writing, Dissertations, Thesis writing, Research Proposal, Research Report, Home work help, Question Answers help, Case studies, mathematical and Statistical tasks, Website development, Android application, Resume/CV writing, SOP(Statement of Purpose) Writing, Blog/Article, Poster making and so on.

We are available round the clock, 24X7, 365 days. You can appach us to our Whatsapp number +1 (613)778 8542 or email to info@universalassignment.com . We provide Free revision policy, if you need and revisions to be done on the task, we will do the same for you as soon as possible.

We provide services mainly to all major institutes and Universities in Australia, Canada, China, Malaysia, India, South Africa, New Zealand, Singapore, the United Arab Emirates, the United Kingdom, and the United States.

We provide lucrative discounts from 28% to 70% as per the wordcount, Technicality, Deadline and the number of your previous assignments done with us.

After your assignment request our team will check and update you the best suitable service for you alongwith the charges for the task. After confirmation and payment team will start the work and provide the task as per the deadline.

Yes, we will provide Plagirism free task and a free turnitin report along with the task without any extra cost.

No, if the main requirement is same, you don’t have to pay any additional amount. But it there is a additional requirement, then you have to pay the balance amount in order to get the revised solution.

The Fees are as minimum as $10 per page(1 page=250 words) and in case of a big task, we provide huge discounts.

We accept all the major Credit and Debit Cards for the payment. We do accept Paypal also.

Popular Assignments

Assignment Quantitative CASP RCT Checklist

CASP Randomised Controlled Trial Standard Checklist:11 questions to help you make sense of a randomised controlled trial (RCT)Main issues for consideration: Several aspects need to be considered when appraising arandomised controlled trial:Is the basic study design valid for a randomisedcontrolled trial? (Section A)Was the study methodologically sound? (Section B)What are

Read More »

Assignment Qualitative CASP Qualitative Checklist

CASP Checklist: 10 questions to help you make sense of a Qualitative researchHow to use this appraisal tool: Three broad issues need to be considered when appraising a qualitative study:Are the results of the study valid? (Section A)What are the results? (Section B)Will the results help locally? (Section C) The

Read More »

Assignment Topics

PS3002 Assignment TopicsDear studentsPlease choose one of the topics below. Please note that if you are repeating this subject, you cannot choose the same topic that you did previously in this subject.patellar tendinopathyinstability of the lumbar spinehamstring strainperoneal tendinopathyhip – labral tear.hip osteoarthritispatellofemoral instabilityankylosing spondylitisanterior cruciate ligament rupture (conservative management)quadriceps

Read More »

Assessment 2 – Report

Assessment 2 – Report (1200 words, 30%)PurposeTo demonstrate an understanding of the purpose and application of evidence-based dietary advice and guidelinesLearning objectives1.Review and analyse the role and function of macronutrients, micronutrients and functional components of food in maintaining health2.Understand digestion, absorption and metabolism of food in the human body and

Read More »

Assessment 2 – Individual Case Study Analysis Report

Southern Cross Institute,Level 2, 1-3 Fitzwilliam Street, PARRAMATTA NSW 2150 & Level 1, 37 George Street PARRAMATTA NSW 2150Tel: +61 2 9066 6902 Website: www.sci.edu.auTEQSA Provider No: PRV14353 CRICOS Provider No: 04078ªPage 1 of 16HRM201 Human Resources ManagementSemester 1, 2026Assessment 2 – Individual Case Study Analysis ReportSubmission Deadline: This Week,

Read More »

ASSESSMENT 2 BRIEF HPSYSD101 The Evolution of Psychology

HPSYSD101_Assessment 2_20240603 Page 1 of 7ASSESSMENT 2 BRIEFSubject Code and TitleHPSYSD101 The Evolution of PsychologyAssessment TaskAnnotated BibliographyIndividual/GroupIndividualLength2,000 words (+/- 10%)Learning OutcomesThe Subject Learning Outcomes demonstrated by successful completion of the task below include:b) Examine the significant figures, events and ideas present in the history of psychology.c) Identify and relate the

Read More »

Assessment 1 – Individual Case Study Analysis Report

HOS203 Contemporary Accommodation ManagementSemester 1, 2026Assessment 1 – Individual Case Study Analysis Report (10%)Submission Deadline: This Week, at 11:59 pm (Week 4)Overview of this AssignmentFor this assessment, students are required to analyse an assigned case study about hospitality industry relevant regulations and/or operational and accreditation failures of a hospitality organisation.

Read More »

Assessment Brief PBHL1003FOUNDATIONS OF HEALTH AND HEALTH CARE SYSTEMS

Assessment BriefPBHL1003FOUNDATIONS OF HEALTH AND HEALTH CARE SYSTEMSTitleAssessment 2 TypeEssay Due DateWeek 6 Monday 14 April 2025, 11:59pm AEST Length1000 words Weighting60% Academic IntegrityNO AI SubmissionUse Word Document – submit to Blackboard / Assessments Tasks & Submission / Assessment 2 Unit Learning OutcomesThis assessment task maps to the following Unit

Read More »

Assignment 4 – Intersection Upgrades and Interchange Station Design

CIVL5550: Civil Infrastructure DesignAssignment 4 – Intersection Upgrades and Interchange Station DesignDue: This WeekSubmission Instructions:1.Submit a report of approximately 10 pages, covering the following:Part 1: Intersection Upgrade Design•Propose upgrade schemes for two sign-controlled intersections and one signalized intersection•Use SIDRA to evaluate the performance of both the original and upgraded intersections•Use

Read More »

Assessment Brief 1

1 of 14Assessment Brief 1Assessment DetailsUnit Code Title NURS2018 Building Healthy Communities through Impactful PartnershipsAssessment Title A1: Foundations of Community Health Promotions ProjectAssessment Type ProjectDue Date Week 4, Monday, 22nd of September 2025, 11:59pm AESTWeight 40%Length / Duration 1200 wordsIndividual / Group IndividualUnit Learning Outcomes(ULOS)This assessment evaluates your achievement of

Read More »

Assignment 1 – Digital Stopwatch

Assignment 1 – Digital StopwatchThis assessment is an individual assignment. For this assignment, you are going to implement the functionality for a simple stopwatch interface as shown above. The interface itself is already provided as a Logisim file named main.circ . Your assignment must be built using this file as

Read More »

Assessment Background Country Profile

BackgroundCountry ProfileKiribati is an island nation situated in the central Pacific Ocean, consisting of 33 atolls2 and reef islands spread out over an area roughly the size of India (see Figure 1).i Yet, Kiribati is also one of the world’s smallest and most isolated country. A summary of Kiribati’s key

Read More »

Assessment 3: PHAR2001 INTRODUCTORY PHARMACOLOGY

PHAR2001 INTRODUCTORY PHARMACOLOGYAssessment 3: Case StudyASSESSMENT 1 BRIEFAssessment Summary Assessment titleAssessment 3: Case study Due DateThursday Week 6, 17 April at 11:59 Length•The suggested number of words (not a word limit) for the individual questions within the case study is as indicated at the end of each individual question. Weighting50%

Read More »

Assessment Module 1 Healthcare Systems Handout

Module 1Healthcare Systems HandoutGroup AgendasHealth Professionals: You got into health to help people. However, as an owner and operator of a multidisciplinary practice, you need to see many patients to cover the cost of equipment, technology, office and consumables, and pay your staff. The Medicare benefit doesn’t cover the rising

Read More »

Assessment 2 – Case study analysis 

Assessment 2 – Case study analysis  Description  Case study analysis  Value  40%  Length  1000 words  Learning Outcomes  1, 2, 3, 4, 5, 6, 7  Due Date  Sunday Week 9 by 23:59 (ACST)  Task Overview  In this assessment, you will choose ONE case study presenting a patient’s medical history, symptoms, and relevant test

Read More »

Assessment NURS2018: BUILDING HEALTH COMMUNITIES

NURS2018: BUILDING HEALTHCOMMUNITIES THROUGH IMPACTFULPARTNERSHIPSAssessment 1 Template: Foundation of Community Health Promotion projectOverall word count excluding the template wording (63 words) and reference list:Introduction to health issue:The case study, increase breast screening in Muslim women living in Broadmeadows,Melbourne, focuses on addressing the low participation rates in breast cancer screening amongMuslim

Read More »

Assessment EGB272: Traffic and Transport Engineering (2025-s1)

EGB272: Traffic and Transport Engineering (2025-s1)ashish.bhaskar@qut.edu.auPage 1 of 8Assessment 1A (15%) Cover PageIndividual component: 5%Group component: 10%You are expected to submit two separate submissions:Individual Submission (5%): Each student must submit their own individual report. Details of the individual report are provided in Section 3.1, and the marking rubric is in

Read More »

Assessment 3 – Essay: Assessment 3 Essay rubric

Unit: NUR5327 – Management and leadership in healthcare practice – S1 2025 | 27 May 2025Assessment 3 – Essay: Assessment 3 Essay rubricLearning Objective 5:Differentiate drivers forchange and proactively leadhealth professionalresponses to changing anddynamic environmentsFails toidentify aclear plannedchange ordoes not linkit to thestrategic plan.0 to 7 pointsIdentifies aplannedchange, butthe link

Read More »

Assessment 2 – Case study analysis 

Assessment 2 – Case study analysis  Description  Case study analysis  Value  40%  Length  1000 words  Learning Outcomes  1, 2, 3, 4, 5, 6, 7  Due Date  Sunday Week 9 by 23:59 (ACST)  Task Overview  In this assessment, you will choose ONE case study presenting a patient’s medical history, symptoms, and relevant test

Read More »

Assessment 1 PPMP20009 (Leading Lean Projects)

Term 1, 2025PPMP20009 (Leading Lean Projects)1Assessment 1 – DescriptionAssessment title Case study reportAssessment weight 40% of the unit marksReport length 3000 wordsMaximum 8 pages excluding references and appendicesReport format MS Word or PDFSubmission type IndividualSubmission due by Friday, Week 6Assessment objectiveThe purpose of this assessment item is to help you

Read More »

Assignment Maternity – Paramedic Management

Title-Maternity – Paramedic ManagementCase Study – Home Birth Learning outcomes1. Understand the pathophysiology and prehospital management of a specific obstetric condition.2. Develop a management plan for a maternity patient.3. Examine models of care available for maternity patients.4. interpret evidence that supports paramedic care of the maternity patient and neonate.5. Demonstrate

Read More »

Assignment Guidelines for Cabinet Submissions

Guidelines for Cabinet SubmissionsGENERALThe purpose of a Cabinet submission is to obtain Cabinet’s approval for a course of action. Ministers may not have extensive technical knowledge of the subject matter -and may have competing calls on their time. It is, therefore, important that Cabinet submissions are presented in a consistent

Read More »

Assignment Secondary research structure

Dissertation – Secondary Research – Possible Structure and Content GuideA front cover stating: student name, module title, module code, Title of project moduleleader, supervising tutor and word count.Abstract (optional and does not contribute to your word count)This should be an overview of the aim of the critical review, the methodology

Read More »

Assignment E-Business and E-Marketing

Module HandbookFaculty of Business, Computing and DigitalIndustriesSchool of Business(On-campus)E-Business and E-MarketingModule.2025-26􀀀Contents Module Handbook 1Contents 2Module Introduction 3Module Leader Welcome 3Module Guide 5Module Code and Title 5Module Leader Contact Details and Availability 5Module Team Tutors Contact Details and Availability 5Module Teaching 5Module Intended Learning Outcomes 5Summary of Content 6Assessment and Deadlines

Read More »

Assignment II: Computational Fluid Dynamics (CFD) Analysis of

CRICOS Provider 00025B • TEQSA PRV12080 1MECH3780: Computational MechanicsAssignment II: Computational Fluid Dynamics (CFD) Analysis ofGeneralised Cardiovascular Medical DevicesIntroduction:In this assignment, you will develop your CFD capability by analysing a benchmark casefrom a validation study sponsored by the U.S. Food & Drug Administration (FDA) and fundedby the FDA’s Critical Path

Read More »

LCRM301 Researching criminology

LCRM301 Researching criminology Worksheet 1 This worksheet will be disseminated to students in Week 3 and will assist them in the planning and development of the second assessment task: literature review. PART 1: Refining your topic The topic I am interested in is: I am interested in this topic because:

Read More »

ASSESSMENT TASK 2 – COURT APPLICATION

APPENDIX B: ASSESSMENT TASK 2 – COURT APPLICATION (30% OF FINAL MARK)General informationThis Assessment task is worth 30 marks of your final mark.The task is either making (Applicant) or opposing (Respondent) an application before the Supreme Court in your respective state based on a fact scenario, which will be uploaded

Read More »

Can't Find Your Assignment?