Unit 5

Design and Develop Learning Programs

TAEDES401

Student Workbook

Copyright

121 Driver Training Pty Ltd holds the rights to this document as well as any accompanying documents in accordance with the Copyright Act 1968 unless otherwise stated.

Reproduction of these materials, whether in part or full, without our prior written consent is prohibited by law. This includes unlicensed or unauthorised copying in public or private institutions with Commonwealth statuary licences.

You are not allowed to copy any section of these materials (as a soft or hard copy), incorporate it in any other document, reformat it or upload it to any retrieval system or file sharing sites.

121 Driver Training conducts routine checks to ensure there are no breaches of the legislation. Any identified breaches can result in prosecution under the law.

If you require to use any portion of these materials for any reasons other than what they are intended for, please contact us on 1300 810 510.

Disclaimer

Information contained in this document is drawn from sources believed to be reliable and are periodically reviewed and updated. 121 Driver Training, its employees and trainers cannot warrant the correctness of the sources used and accept no responsibility whatsoever for any errors or omissions or any loss or damage resulting from using the information provided here. Trainees must exercise due diligence to make sure they have the most reliable and up-to-date information.

Version control and amendment history

Reason	Release date	Details
Unit released	April 2016	V1 release
Unit updated	March 2017	V2 release
121 review	January 2022	Changes to content and formatting

ASSESSMENT DECLARATION

ALL STUDENTS MUST COMPLETE AND SUBMIT THIS DECLARATION WITH EVERY WRITTEN ASSESSMENT

By submitting this assessment:

I, …………………… Click or tap here to enter text. ……………….……, do solemnly and sincerely declare that

                               [name of declarant]

1. The work in this assessment is my own work.
2. I have correctly referenced the material taken from my own earlier work or that of other persons.
3. I have read and agreed to be bound by the rules, regulations, and policies mentioned in the 121 Driver Training’s Student Handbook which I received at the time of my enrolment.
4. I may be subject to student discipline in the event of an act of academic misconduct by me including but not limited to plagiarism or cheating.

I further grant 121 Driver Training, or any third party authorised by 121 Driver Training, the right to reproduce and/or communicate (make available online or electronically transmit) the work I have submitted for the purpose of detecting plagiarism.

and I make this solemn declaration conscientiously believing the same to be true, and by virtue of the provisions of the Oaths Act 1900.

Declared at: …… Click or tap here to enter text…… on …………… Click or tap here to enter text. ………………

                                         [place]                                                          [date]

Plagiarism occurs when you use words, ideas, or work products attributable to another identifiable person or source: without attributing the work to the source from which it was obtainedin a situation in which there is a legitimate expectation of original authorshipto obtain some benefit, credit, or gain which need not be monetary   Cheating is defined as obtaining, attempting to obtain or aiding another to obtain credit for work or any improvement in evaluation of performance, by any dishonest or deceptive means.   Plagiarism and cheating are both considered a violation of academic integrity. It is subject to sanctions such as penalties, suspension, expulsion from school, substantial fines and even imprisonment.

This page is intentionally left blank.

Question 1

People participate in learning programs for several reasons. List at least 5.

Click or tap here to enter text.

Question 2

You have been asked to deliver on-the-job training to a small group of employees who wish to upgrade their communication skills. Explain, in two short paragraphs, the procedures you would follow to find out what training outcomes and objectives are important to the learners.

Click or tap here to enter text.

Question 3

What is a competency standard?

Click or tap here to enter text.

Question 4

In a short paragraph explain how you would access and confirm the competency standards and other training specifications on which a learning program (within your field of expertise) might be based?

Click or tap here to enter text.

Question 5

Explain, in a short paragraph, why is it important that program developers, facilitators, trainers and assessors identify the language, literacy and numeracy requirements relative to proposed programs/courses.

Click or tap here to enter text.

Question 6

Trainers/facilitators should, before implementing programs, identify the characteristics of the target learner group. Explain how you would identify learner characteristics and develop learner profiles. Why is it important to do this?

Click or tap here to enter text.

Question 7

What is a Training Needs Analysis (TNA)?

Click or tap here to enter text.

Question 8

Why is it important that program developers know the legislation and regulations affecting VET?

Click or tap here to enter text.

Question 9

What legislation and formal requirements, relevant to the VET framework, might impact a training program delivery? List 5.

Click or tap here to enter text.

Question 10

Explain what it means to say that “a training package has been updated” and how package updates affect training.

Click or tap here to enter text.

Question 11

Explain what an audit by a regulatory body is and how it contributes to quality management processes for RTOs.

Click or tap here to enter text.

Question 12

List eight things that might be taken into consideration when assessing and evaluating the suitability of existing materials and eight questions you might ask yourself when determining whether to use existing materials or develop new materials.

Click or tap here to enter text.

Question 13

Describe the things that might be taken into consideration when identifying the assessment requirements of a particular training program.

Click or tap here to enter text.

Question 14

Mark the following statements as true or false:

	True	False
It is a good idea to determine whether there are training programs or training resources already available, so that you do not waste time and money developing new learning materials.	☐	☐
Training participants do not need to know why they are being trained; they just must attend.	☐	☐
Assessment involves the collection of sufficient, valid, reliable, and current evidence to make a judgement of competence.	☐	☐
A program plan provides a map that facilitators/trainers/assessors and clients/learners can readily follow.	☐	☐
To conduct a valid assessment, the assessment tools must map closely against the learning outcomes and performance criteria outlined in the training plan.	☐	☐
It is not necessary to plan for training – you can just improvise.	☐	☐
Assessment pathways and tools have no effect on the design and development of the training program plan.	☐	☐
Both the learners and the organisation for which they work should have a clear understanding of the benefits of the proposed training.	☐	☐
Training programs, training approaches, methods and activities should be adapted to suit the work/employment rolls of learning participants.	☐	☐
It is up to the learning participants, not the training facilitators, to source and provide suitable resources.	☐	☐

Question 15

When designing learning programs, it is important that the units to be studied link appropriately with each other and with the required learning outcome(s). Delivery of the units must be sequenced so that the training program is logical and relevant to the learner. Explain how delivery of the units would be sequenced to ensure that the learning was effective, relevant and logical.

Click or tap here to enter text.

Question 16

In a short paragraph explain why it is a good idea, when delivering training and helping participants develop new skills, to involve as many of the learner’s senses as possible?

Click or tap here to enter text.

Question 17

Why is a review process necessary and what is a review likely to achieve?

Click or tap here to enter text.

Question 18

How can trainers/facilitators/assessors ensure that the learning situation complies with health and safety requirements?

Click or tap here to enter text.

Question 19

Explain the actions that might be taken to control risks to learner safety and support a safe progression of learning. Provide and discuss 4 examples.

Click or tap here to enter text.

Question 20

Explain what training packages are and how they can contribute to learning program design.

Click or tap here to enter text.

Question 21

Learning programs have different purposes and focuses. How would you ensure that the training program will meet the needs of key stakeholders?

Click or tap here to enter text.

Question 22

List at least 10 examples of legislation, codes, and national standards relevant to e-learning and expectations for using technology.

Click or tap here to enter text.

Question 23

Make a list of at least six things a program developer might suggest about health and safety in the context of the delivery of training programs.

Click or tap here to enter text.

Project 1

Use the information provided in the NSW Learner Driver Log Book to prepare TWO (2) training programs for 2 fictious students using the templates provided below.

The skills you must demonstrate include:

1. language, literacy and numeracy skills appropriate to this unit and the qualification level
2. cognitive skills to develop program content and structure
3. evaluation skills to determine the time required for each learning segment and the overall timeline of the learning program
4. the ability to manage your time and actions to ensure the lesson is delivered in a timely manner

Training Program 1

Client Details	Contact Person: Click or tap here to enter text.	Position: Click or tap here to enter text.
Program Title	Click or tap here to enter text.
Standards	Standards this program is based on (e.g., Competency Standards, Accredited Course, Legislation/Compliance, etc.)
Click or tap here to enter text.
Target group	Click or tap here to enter text.
Entry Requirements	Click or tap here to enter text.
Delivery Model & Expected Duration	Total Hours: Click or tap here to enter text.	Components: (e.g., Classroom, On-the-job, Self-directed, etc.)
Click or tap here to enter text.
Delivery Method	Brief description of methods and activities (e.g., lecture, role play, etc.)
Click or tap here to enter text.
Assessment Methods Select the assessment methods that will be used	Class-based assessment methods	Work-based or independent assessment methods
☐ Observation Checklists	☐ Oral Q&A	☐ Demonstration & Simulation	☐ Workplace Observation	☐ Log Books	☐ Third Party Report
☐ Class-based activities	☐ Class Presentations	☐ Written Tests	☐ Projects	☐ Portfolio of Work Samples	☐ Journal
☐ Group Work	☐ Case Studies	☐ Role Play	☐ Written Task	☐ Performance Review	☐ Other
Assessments	Brief description of when and how assessments will occur.
Click or tap here to enter text.

Session Plan Titles	Key focus point of each session in this learning program, perhaps the central topic or activity being conducted in each session. (E.g., Session 1: Preparing to drive; Session 2: vehicle controls, etc.). Ensure each of your sessions does not exceed 3 hours in duration.
Session 1	Click or tap here to enter text.
Session 2	Click or tap here to enter text.
Session 3	Click or tap here to enter text.
Session 4	Click or tap here to enter text.
Session 5	Click or tap here to enter text.

Facilities	e.g., Room/Location details, etc.
Click or tap here to enter text.
Equipment	Items needed (e.g., Dual control car, etc.)
Click or tap here to enter text.
Learning Resources & Materials	Resources or materials required (e.g., Road Users’ Handbook, A Guide to the Driving Test, etc.)
Click or tap here to enter text.
OH&S	Will an OH&S risk and hazard assessment be conducted in the training location?
☐ No	☐ Yes	When? Click or tap here to enter text.	By whom? Click or tap here to enter text.

Review of Learning Program	Areas of risk in your plan
Click or tap here to enter text.
Post Implementation Review	How will you review your plan post implementation?
Click or tap here to enter text.

Training Program 2

Client Details	Contact Person: Click or tap here to enter text.	Position: Click or tap here to enter text.
Program Title	Click or tap here to enter text.
Standards	Standards this program is based on (e.g., Competency Standards, Accredited Course, Legislation/Compliance, etc.)
Click or tap here to enter text.
Target group	Click or tap here to enter text.
Entry Requirements	Click or tap here to enter text.
Delivery Model & Expected Duration	Total Hours: Click or tap here to enter text.	Components: (e.g., Classroom, On-the-job, Self-directed, etc.)
Click or tap here to enter text.
Delivery Method	Brief description of methods and activities (e.g., lecture, role play, etc.)
Click or tap here to enter text.
Assessment Methods Select the assessment methods that will be used	Class-based assessment methods	Work-based or independent assessment methods
☐ Observation Checklists	☐ Oral Q&A	☐ Demonstration & Simulation	☐ Workplace Observation	☐ Log Books	☐ Third Party Report
☐ Class-based activities	☐ Class Presentations	☐ Written Tests	☐ Projects	☐ Portfolio of Work Samples	☐ Journal
☐ Group Work	☐ Case Studies	☐ Role Play	☐ Written Task	☐ Performance Review	☐ Other
Assessments	Brief description of when and how assessments will occur.
Click or tap here to enter text.

Session Plan Titles	Key focus point of each session in this learning program, perhaps the central topic or activity being conducted in each session. (E.g., Session 1: Preparing to drive; Session 2: vehicle controls, etc.). Ensure each of your sessions does not exceed 3 hours in duration.
Session 1	Click or tap here to enter text.
Session 2	Click or tap here to enter text.
Session 3	Click or tap here to enter text.
Session 4	Click or tap here to enter text.
Session 5	Click or tap here to enter text.

Facilities	e.g., Room/Location details, etc.
Click or tap here to enter text.
Equipment	Items needed (e.g., Dual control car, etc.)
Click or tap here to enter text.
Learning Resources & Materials	Resources or materials required (e.g., Road Users’ Handbook, A Guide to the Driving Test, etc.)
Click or tap here to enter text.
OH&S	Will an OH&S risk and hazard assessment be conducted in the training location?
☐ No	☐ Yes	When? Click or tap here to enter text.	By whom? Click or tap here to enter text.

Review of Learning Program	Areas of risk in your plan
Click or tap here to enter text.
Post Implementation Review	How will you review your plan post implementation?
Click or tap here to enter text.

Get expert help for Design and Develop Learning Programs and many more. 24X7 help, plag free solution. Order online now!