GEEN1125: Finite Element Applications

GEEN1125: Finite Element Applications

Resit Coursework Questions

Start date: 11:59 pm on 6th July 2021 End Date: 11:59 pm on 17th July 2021

Course Tutor: Dr. Michael Okereke Email: xxxxx@gre.ac.uk

Phone: XXXXXXXXXXXX

Instructions

  1. Answer ALL questions in this Coursework booklet
  1. You have access to software at Nelson 128 laboratories where you can do this coursework. Alternatively, you can also remote log to virtual desktops which has all required software needed for this laboratory.
  2. All submissions will be via Turnitin on the Course Moodle Page in the section of the portal where 2021 Coursework Resit are specified.
  3. Do not email the course tutor your submissions as this will not be accepted.
  1. All your solutions will be in a Microsoft Word document which you should convert to a PDF file before uploading to the Course Moodle Page.
  2. Support resources are available on the Course Moodle page to help you with revising and answering these questions.

Q1.

A three-noded planar triangular truss, shown in Figure Q1, is subjected to a concentrated force, F = 10 kN at node, N2. The truss is made of a cylindrical bar of diameter, d = 3.0 mmand steel material of Young’s Modulus, E = 210 GPa. If the planar truss is fixed securely at node N1but has x- and y-axis roller supports at nodes N2and N3respectively.

Using the principles of Direct Stiffness Method, and from first principles, undertake the following calculations:

  1. Determine the three-member stiffness matrices, 𝑲𝑒, 𝑲𝑒 and 𝑲𝑒 for the bars.

1 2 3

[10 marks]

  1. Derive the structural stiffness matrix, KSfor this structure. [5 marks]
  1. Using the appropriate boundary condition, show all the steps and then determine the displacements at nodes N2and N3. [5 marks]

Note that you must show in detail all the steps required to determine all stiffness matrices.

Y

xX F =10kN

[0,0] [2,0]

FigureQ1

Q2.

A two-step cylindrical bar of total length 4m is subjected to a uniaxial force, F as shown in Figure Q2. To determine its nonlinear deformation whilst reducing computational cost, you decide to develop a new element formulation based on a three-noded 1D element whose isoparametric natural coordinates are given in Figure Q2.

  1. Derive the mapping function, ξ= f(x) needed to relate the xy-coordinate system to the isoparametric natural coordinates, ξ.

[2 mark]

  1. Derive the element’s three shape functions, namely N1,N2and N3.

[12 marks]

  1. Derive the strain-displacement matrix, Band evaluate its value when ξ=0.5.

[6 marks]

y

F

ξ

ξ=0 ξ=0.5 ξ=1.0

FigureQ2

Q3.

A 2D dogbone specimen, whose dimensions are given in Figure Q3, is made by extrude- cutting the gauge section of an initially rectangular specimen using the insert elliptical geometry. The specimen is made from aluminium of Young’s Modulus, E = 70GPa, Poisson ratio, v=0.33, and yield stress, σyield = 220 MPa. It has both gripped and loaded ends. The test specimen is imposed with a Dirichlet uniform displacement of ΔL = 4mm. You are to undertake the mesh density study to determine the appropriate mesh for subsequent investigation.

  1. Undertake tensile simulation of the specimen using seed sizes of 6,3, 0.5. Show the contour plots for plastic strain, PE for all simulations. Draw a convergence plot of Average PE versus number of elements. Comment on the implications of mesh density on simulation results. [10 marks]

ΔL = 4 mm

Gauge sect ion ext rude cut using

ellipse below

Loaded End, wit h prescribed

load, ΔL

Gripped End, f ixed securely

20 mm

40 mm

20 mm

40 mm

FigureQ3A

  1. In order to prescribe a kinematic constraint to a typical finite element model, Multi- Freedom Constraint (MFC) equations are required. Write the ABAQUS-style linear constraint equation for the following equations:

a. 0.5uN60  3.5uN78  2uN15  8.3uN15  3.2uN6  0.10uN54

3 2 1 3 1 2

b. uN4  3uN2  2uN5  3uN16 whereuN16 ce2uN3 buN4 ;

forc,bbeingconstants

2 1 1 2 2 3 1

[3 marks]

  1. An inverted T-section support structure, of dimensions given in FigureQ4, is designed to support a central column load on the load region zone. The two end faces of the horizontal bar are fixed securely in X, Y, and Z-axes. The bar is made of steel of Young’s Modulus, E=210GPa, Poisson ratio, v= 0.33and yield stress, σyield= 220MPa.

Run a simulation of the compressive behaviour of the structure by imposing concentrated load, U = 20 mm on the structure based on the following canonical equation:

𝑈𝐿𝑅𝑆𝑒𝑡 − 2.3log10 (20)𝑈𝑅𝑃𝑆𝑒𝑡 = 0

2 2

Where LRSet and RPSet are nodal sets for load region and reference point respectively. Show contour plots for von Mises stress, Misesand in-plane shear stress, S12. [7 marks]

Load Region

y z

x

125 mmFixed Face in XYZ

50 mm

200 mm

125 mmFixed Face in XYZ

50 mm

Ref erence Point

300 mm

50 mm

[- 500,- 500,- 500]

FigureQ3C,D

Q4.

The Rochester bridge consists of arched trusses with Figure Q4 showing a segment of the bridge. The total length of the bridge deck is 140 m with the span directly over the river measured at L =100m. Assume that the bridge is made of cylindrical

trusses of steel material with Young’s Modulus, E = 210 GPa and diameter, d = 40mm. The bridge is fixed securely at nodes N1, N2with roller supports at nodes N7 and N8.

The test load case under consideration represents a traffic pile-up of sedan cars of same sizes and weights which imposes a uniformly distributed load, ω = 3000 N/macting solely on the 100-m span of the bridge. The bridge deck has a rectangular cross-section of base, b=8mand thickness, h=5m.

The Rochester Bridge Trust has announced a competition for University of Greenwich MSc engineering students to undertake a detailed structural analysis of the current design with a view to identify probable improvements to extend the lifespan of the bride.

  1. Using MATFESETMsolver, undertake the FE simulation of the bridge and determine the absolute maximum displacement, 𝑣𝑛𝑢𝑚𝑒𝑟𝑖𝑐𝑎𝑙 of the bridge under the specified load case. Show contour plots of the deformed profile.

[8 marks]

  1. In order to understand the benefit of the arched truss design in limiting the deflection over the 100-mspan of the bridge, calculate the deflection of the

5𝜔𝐿4

bridge without the arched trusses using the equation: 𝑣𝑎𝑛𝑎𝑙𝑦𝑡𝑖𝑐𝑎𝑙 = 384𝐸𝐼

where L=bridge span, ω = distributed load, E=Young’s Modulus, and I=

𝑏ℎ3

area moment of inertia for rectangular section, i.e. 𝐼 =

.

12

[3 marks]

  1. Calculate the percentage improvement in limiting the deflection of the bridge by introducing the arched truss. Note that percentage improvement is calculated using the equation:

%𝐼𝑚𝑝𝑟𝑜𝑣𝑒𝑚𝑒𝑛𝑡 =

𝑣𝑎𝑛𝑎𝑙𝑦𝑡𝑖𝑐𝑎𝑙 𝑣𝑛𝑢𝑚𝑒𝑟𝑖𝑐𝑎𝑙

𝑣𝑎𝑛𝑎𝑙𝑦𝑡𝑖𝑐𝑎𝑙

× 100%

[3 marks]

  1. As part of a review of your analysis, you noticed that the actual Rochester Bridge truss is made from an I-section wide-flange beam of designation W150x18 and cross-sectional area, A = 1730 mm2. What is the percentage error introduced to your simulations by assuming a solid cylindrical truss configuration of diameter, d=20mm.

[2 marks]

  1. Suggest and use MATFESE to demonstrate the nature of one improvement of the bridge to ensure extended life span.

[4 marks]

N2

Figure Q4

Q5.

A unidirectional (UD) composite consists of circular E-glass fibre material embedded within a square-shaped polypropylene matrix. The UD composite has a 20% volumefraction of fibre with fibre diameters ranging from 1.5 um to 2.52 um. We want to use the principles of computational micromechanics to determine the effective properties of the test composite in a specific test direction.

For this study, three representative volume elements (RVEs) shown in Figure Q5Awere identified. The centre locations (in μm units) of the fibres within the matrix medium are given in Table Q5A. All three RVEs have a dimension of length, L = 10 μmand width, W=10μm. The fibre radius for each RVE type are given in TableQ5A. The properties of the fibre and polypropylene constituents are given in TableQ5B.

  1. Generate the virtual domains for all three RVE types ensuring that you trim off any boundary fibres to preserve the 20% volume fraction. [5 marks]
  1. Undertake an FEM simulation of tensile deformation along the X-axis for all three RVE types. Since this is a micromechanical study on a heterogeneous material, you MUSTusePeriodicBoundarycondition foryouranalysis.

Show contour plots of (a) Von-Mises Stress, Mises (b) displacement magnitude, UMagnitudeand (c) plastic strain, PEfor all three RVE types.

[8 marks]

  1. Determine the stress-strain (i.e. σ11vs ε11) graphs for the three RVEs showing the numerically determined Young’s Modulus, E11,numericaland Yield strength, σY,numericalof the test composite. [3 marks]
  1. Determine the analytically determined Young’s Modulus of the composite

based on the formula:

𝐸𝑚𝐸𝑓

𝐸11,𝑎𝑛𝑎𝑙𝑦𝑡𝑖𝑐𝑎𝑙 = 𝐸

𝑉 + 𝐸 𝑉

𝑚 𝑓 𝑓 𝑚

Where Emand Efare Young’s Moduli of the matrix and fibre respectively; Vf and Vm are volume fractions of the fibre and matrix constituents respectively.

Compare the analytical and numerical Young’s modulus values for the three RVE types. Comment on the effect of number of fibres within the RVE window on the effective properties of the test composite. [4 mark]

Figure Q5

TableQ5A:LocationsofFibresinthreeRVEs(inμmunits)


Radius = 1.26 μmRadius = 1.00 μmRadius = 0.75 μm
S/NoRVE 1RVE2RVE3

XYXYXY
1558.68.99.15.3
2

5.18.81.18.3
3

5.91.53.42.9
4

2.04.17.50.1
5

7.93.26.05.3
6

1.11.47.37.1
7



7.82.9
8



4.00.6
9



1.01.3
10



7.510.1
11



4.010.6

TableQ5B:Propertiesofinclusionsoftheunidirectionalcomposite

MaterialYoung’s Modulus, E [GPa]Poisson ratio, νYieldstress,y [MPa]Plasticstrain,p
Glass fibre particles730.20

Polypropylene1.3080.40400.00
Order Now

Struggling with GEEN1125: Finite Element Applications Assignment help? Take the best online service. Order Now!

No Fields Found.
Universal Assignment (August 31, 2025) GEEN1125: Finite Element Applications. Retrieved from https://universalassignment.com/geen1125-finite-element-applications/.
"GEEN1125: Finite Element Applications." Universal Assignment - August 31, 2025, https://universalassignment.com/geen1125-finite-element-applications/
Universal Assignment June 18, 2022 GEEN1125: Finite Element Applications., viewed August 31, 2025,<https://universalassignment.com/geen1125-finite-element-applications/>
Universal Assignment - GEEN1125: Finite Element Applications. [Internet]. [Accessed August 31, 2025]. Available from: https://universalassignment.com/geen1125-finite-element-applications/
"GEEN1125: Finite Element Applications." Universal Assignment - Accessed August 31, 2025. https://universalassignment.com/geen1125-finite-element-applications/
"GEEN1125: Finite Element Applications." Universal Assignment [Online]. Available: https://universalassignment.com/geen1125-finite-element-applications/. [Accessed: August 31, 2025]

Please note along with our service, we will provide you with the following deliverables:

Please do not hesitate to put forward any queries regarding the service provision.

We look forward to having you on board with us.

Most Frequent Questions & Answers

Universal Assignment Services is the best place to get help in your all kind of assignment help. We have 172+ experts available, who can help you to get HD+ grades. We also provide Free Plag report, Free Revisions,Best Price in the industry guaranteed.

We provide all kinds of assignmednt help, Report writing, Essay Writing, Dissertations, Thesis writing, Research Proposal, Research Report, Home work help, Question Answers help, Case studies, mathematical and Statistical tasks, Website development, Android application, Resume/CV writing, SOP(Statement of Purpose) Writing, Blog/Article, Poster making and so on.

We are available round the clock, 24X7, 365 days. You can appach us to our Whatsapp number +1 (613)778 8542 or email to info@universalassignment.com . We provide Free revision policy, if you need and revisions to be done on the task, we will do the same for you as soon as possible.

We provide services mainly to all major institutes and Universities in Australia, Canada, China, Malaysia, India, South Africa, New Zealand, Singapore, the United Arab Emirates, the United Kingdom, and the United States.

We provide lucrative discounts from 28% to 70% as per the wordcount, Technicality, Deadline and the number of your previous assignments done with us.

After your assignment request our team will check and update you the best suitable service for you alongwith the charges for the task. After confirmation and payment team will start the work and provide the task as per the deadline.

Yes, we will provide Plagirism free task and a free turnitin report along with the task without any extra cost.

No, if the main requirement is same, you don’t have to pay any additional amount. But it there is a additional requirement, then you have to pay the balance amount in order to get the revised solution.

The Fees are as minimum as $10 per page(1 page=250 words) and in case of a big task, we provide huge discounts.

We accept all the major Credit and Debit Cards for the payment. We do accept Paypal also.

Popular Assignments

Assignment Help in Rowville, Melbourne

Introduction Rowville is a well-established suburb located around 27 km south-east of Melbourne’s CBD. Known for its family-friendly vibe, spacious parks like Stud Park Reserve, and excellent community facilities, Rowville offers students a balanced mix of suburban comfort and easy access to education hubs. With major roads such as the

Read More »

Assignment Help in Rosanna, Melbourne

Introduction Rosanna is a leafy and family-friendly suburb located about 12 km north-east of Melbourne’s CBD. Known for its green streets, Rosanna Parklands, and strong community atmosphere, it provides students with a calm environment while staying close to the city. The suburb is well connected by Rosanna Station and major

Read More »

Assignment Help in Ripponlea, Melbourne

Introduction Ripponlea is a charming inner-city suburb located just 8 km south-east of Melbourne’s CBD. Famous for the heritage-listed Rippon Lea Estate and its leafy residential streets, Ripponlea offers students a mix of cultural richness and convenient city living. With easy tram and train connections, students can travel effortlessly to

Read More »

Assignment Help in Ringwood North, Melbourne

Introduction Ringwood North is a leafy and family-friendly suburb located about 28 km east of Melbourne’s CBD. Known for its green streets, parks, and welcoming community, Ringwood North offers a peaceful residential lifestyle while remaining close to Melbourne’s educational and business hubs. With strong transport connections via nearby Ringwood Station

Read More »

Assignment Help in Ringwood East, Melbourne

Introduction Ringwood East is a peaceful residential suburb located around 25 km east of Melbourne’s CBD. Known for its leafy streets, friendly community, and excellent access to parks and schools, Ringwood East is ideal for students seeking a quieter lifestyle while still being close to Melbourne’s educational hubs. With its

Read More »

Assignment Help in Ringwood, Melbourne

Introduction Ringwood is a bustling suburb located around 25 km east of Melbourne’s CBD. Known for its leafy residential streets, modern shopping centres like Eastland, and easy access to the scenic Dandenong Ranges, Ringwood offers a great lifestyle for students and professionals. The suburb is well connected via Ringwood Station

Read More »

Assignment Help in Richmond, Melbourne

Introduction Richmond is one of Melbourne’s most iconic inner-city suburbs, located just 3 km east of the CBD. Famous for its lively café culture, bustling shopping streets like Bridge Road, and its thriving arts and sports scene, Richmond blends lifestyle and convenience perfectly. With excellent tram and train connections, students

Read More »

Assignment Help in Reservoir, Melbourne

Assignment Help in Reservoir, MelbourneIntroductionReservoir is a thriving suburb located just 12 kilometres north of Melbourne’s CBD. Known for its multicultural community, leafy parks, and welcoming neighbourhoods, Reservoir strikes the perfect balance between suburban comfort and city convenience. It is well-connected through trains, buses, and trams, making travel easy for

Read More »

Assignment Help in Parkville – Universal Assignment

Parkville, located just 3 km north of Melbourne CBD, is one of Melbourne’s most prestigious academic hubs. It is home to The University of Melbourne, Monash University (Pharmacy campus), and major research institutes like the Walter and Eliza Hall Institute and the Royal Melbourne Hospital precinct. With such a concentration

Read More »

Assignment Help in Oakleigh East – Universal Assignment

Oakleigh East, located about 17 km south-east of Melbourne CBD, is a peaceful and residential suburb in the City of Monash, known for its family-friendly environment and convenient access to shopping and educational facilities. With nearby institutions like Monash University, Holmesglen Institute, and TAFE Victoria, many students living in Oakleigh

Read More »

Assignment Help in Preston – Universal Assignment

Preston, located about 9 km north of Melbourne’s CBD, is a thriving multicultural suburb that attracts many university and TAFE students. With the presence of Melbourne Polytechnic (Preston Campus) and close proximity to La Trobe University (Bundoora campus) and RMIT University, Preston has a large student population. While the suburb

Read More »

Assignment Help in Point Cook – Universal Assignment

Point Cook, located around 25 km southwest of Melbourne’s CBD, is a fast-growing residential suburb in the City of Wyndham. Known for its modern housing estates, coastal beauty, and cultural diversity, Point Cook is also home to many university and TAFE students. With Victoria University, RMIT, Deakin University, and the

Read More »

Assignment Help in Pascoe Vale South – Universal Assignment

Pascoe Vale South, situated about 9 km north of Melbourne’s CBD, is a quiet, family-friendly suburb within the City of Merri-bek. Known for its leafy streets, community parks, and excellent schools, the suburb is also home to many university students due to its proximity to RMIT University, La Trobe University,

Read More »

Assignment Help in Pascoe Vale – Universal Assignment

Pascoe Vale, located just 10 km north of Melbourne’s CBD, is a thriving suburb in the City of Merri-bek. It is a popular residential area for students due to its proximity to leading universities such as RMIT University, La Trobe University, and the University of Melbourne. With excellent transport links

Read More »

Assignment Help in Prahran – Universal Assignment

Prahran, located just 5 km southeast of Melbourne’s CBD, is one of the city’s most vibrant inner suburbs. Known for its trendy cafes, boutique shopping on Chapel Street, and buzzing nightlife, Prahran also has a large student population. Its close proximity to Monash University (Caulfield campus), Swinburne University of Technology,

Read More »

Assignment Help in Parkdale – Universal Assignment

Parkdale, located around 23 km south-east of Melbourne CBD, is a beautiful beachside suburb in the City of Kingston. Known for its relaxed lifestyle, coastal charm, and proximity to Monash University, Holmesglen Institute, and Deakin University, Parkdale is home to many students balancing academic studies with personal and professional commitments.

Read More »

Assignment Help in Oakleigh South – Universal Assignment

Oakleigh South, located about 20 km south-east of Melbourne CBD, is a suburban area in the City of Kingston, known for its family-friendly environment, parks, and convenient access to educational facilities. With nearby institutions like Monash University, Holmesglen Institute, and TAFE campuses, students in Oakleigh South often require professional assignment

Read More »

Assignment Help in Ormond – Universal Assignment

Ormond, located about 12 km south-east of Melbourne CBD, is a well-connected residential suburb in the City of Glen Eira. Known for its proximity to Monash University Caulfield Campus, Holmesglen Institute, and local schools, Ormond attracts both local and international students. With increasing academic demands, many students search for assignment

Read More »

Assignment Help in Oakleigh – Universal Assignment

Oakleigh, located about 14 km south-east of Melbourne CBD, is a lively suburb in the City of Monash, known for its multicultural community, shopping precincts, and proximity to educational institutions. With access to Monash University, Holmesglen Institute, and nearby TAFE campuses, many students in Oakleigh seek professional assignment help in

Read More »

Assignment Help in Oak Park – Universal Assignment

Oak Park, located about 12 km north of Melbourne CBD, is a suburban area in the City of Moreland, known for its peaceful residential streets, schools, and local amenities. With access to nearby institutions such as RMIT University, University of Melbourne, and TAFE campuses, many students in Oak Park seek

Read More »

Assignment Help in Nunawading – Universal Assignment

Nunawading, located about 20 km east of Melbourne CBD, is a thriving suburb in the City of Whitehorse, known for its leafy streets, shopping centres, and proximity to educational institutions. With access to Deakin University, Box Hill Institute, and nearby TAFE campuses, students in Nunawading often seek professional assignment help

Read More »

Assignment Help in Notting Hill – Universal Assignment

Notting Hill, located about 22 km south-east of Melbourne CBD, is a residential suburb in the City of Monash, known for its peaceful environment and proximity to shopping centres, schools, and educational institutes. With access to nearby campuses like Monash University, Holmesglen Institute, and TAFE Victoria, many students in Notting

Read More »

Assignment Help in Northcote – Universal Assignment

Northcote, located about 7 km north-east of Melbourne CBD, is a vibrant suburb known for its multicultural community, trendy cafes, and lively student population. With easy access to RMIT University, University of Melbourne, and nearby TAFE institutes, Northcote has become a popular area for students pursuing higher education. Many students

Read More »

Assignment Help in North Melbourne – Universal Assignment

North Melbourne, located just 2 km north-west of Melbourne CBD, is a bustling inner-city suburb known for its historic architecture, multicultural community, and proximity to major educational institutions. With easy access to RMIT University, University of Melbourne, and nearby TAFE campuses, students in North Melbourne often require professional assignment help

Read More »

Assignment Help in Noble Park – Universal Assignment

Noble Park, located about 25 km south-east of Melbourne CBD, is a thriving suburb in the City of Greater Dandenong. Known for its multicultural community, shopping centres, and schools, Noble Park is home to a growing student population. With access to nearby institutions like Monash University, Chisholm Institute, and TAFE

Read More »

Assignment Help in Niddrie – Universal Assignment

Niddrie, located about 10 km north-west of Melbourne CBD, is a bustling suburb known for its residential communities, shopping centres, and schools. With easy access to Victoria University, RMIT, and nearby TAFE institutes, Niddrie is home to many students who often seek assignment help in Niddrie to manage academic workloads

Read More »

Assignment Help in Narre Warren South – Universal Assignment

Narre Warren South, located 38 km south-east of Melbourne CBD, is a growing suburb in the City of Casey. Known for its residential communities, schools, and green spaces, Narre Warren South is home to many students who pursue higher education at nearby institutions such as Monash University Clayton Campus, Federation

Read More »

Assignment Help in Narre Warren North – Universal Assignment

Narre Warren North, located about 36 km south-east of Melbourne CBD, is a fast-growing suburb in the City of Casey. Known for its family-friendly community, excellent schools, and green spaces, the suburb also attracts students pursuing higher education in Melbourne. With access to nearby institutions like Monash University Clayton Campus,

Read More »

Assignment Help in Narre Warren – Universal Assignment

Narre Warren, located about 38 km south-east of Melbourne CBD, is one of the fastest-growing suburbs in the City of Casey. Known for Fountain Gate Shopping Centre, family-friendly communities, and excellent schools, Narre Warren also attracts a large number of students pursuing higher education in Melbourne and surrounding areas. With

Read More »

Assignment Help in Mulgrave – Universal Assignment

Mulgrave, located 21 km south-east of Melbourne CBD, is a vibrant suburb with a mix of residential, business, and educational opportunities. With close access to Monash University Clayton Campus, Holmesglen Institute, and nearby TAFE colleges, Mulgrave attracts a large number of students. Many students here face challenges with assignments and

Read More »

Can't Find Your Assignment?