TASK 1 – Installation, operation and troubleshooting a medium enterprise router – Site #1

CASE SCENARIO

Using CISCO PACKET TRACER create a network with minimum 2 routers and 2 switches; one of the routers must be configure as a gateway for internet connectivity. Also, you need to create 3 subnets for the 3 different departments.

Admin: 30 devices

IT: 20 devices

Management: 55 devices

Designing a classless IP addressing scheme that satisfy the needs of the network.

In regards to security:

1. Admin and Management subnets must not have access to the IT subnet.
2. IT subnet must have access to all the subnets of the net.
3. Configure users and passwords for your routers.
4. Implement a TACACS+ server to manage AAA in all your routers.

Deliverables

Your document must include

1. PLAN
   1. Introduction
   2. Description of the network devices that you will use in your implementation
   3. The proposed topology of your network
   4. The design of your classless IP addressing scheme
   5. General documentation of your network, which must contain but is not limited to IP addresses of all the devices on your network. User names and passwords. Protocols and other security features. Device Name IP Address Subnet Mask Username Password IT-1 1.0.1.0 255.255.255.0 ictnwk542 Danford2021
   6. (remember the name of your devices must match the name in the topology)
2. IMPLEMENTATION
   1. Screenshot of your configuration, crop your screenshot making sure all the relevant information is captured and make a small comment of what the screenshot is about (You must take screen shot of the configuration process. The #showrun command can be used in the testing phase)
   2. First, setup all the basic configuration settings (IP, DEVICE NAMES, USERNAME AND PASSWORDS…ETC)
   3. Second, test all the basic configuration works and that you have proper connectivity in your network and to the ISP
   4. Third, implement the security features you proposed in your PLAN and test them.
3. CONCLUSION
   1. In your conclusion include any problems you may include and the troubleshooting process you follow to solve them.
4. REFERENCING
   1. The Referencing requirements have changed, please follow the link below for more information https://www.danford.edu.au/wp-content/uploads/2021/02/Guidelines-for-Referencing.pdf

TASK 2 – Installation, operation and troubleshooting a medium enterprise router – Site #2

CASE SCENARIO

Using CISCO PACKET TRACER create a network with minimum 3 routers and 3 switches; one of the routers must be configure as a gateway for internet connectivity. Also, you need to create 4 subnets for the 4 different departments.

Admin: 30 devices

IT: 20 devices

Management: 55 devices

Marketing: 150 devices

Designing a classless IP addressing scheme that satisfy the needs of the network.

In regards to security:

1. Admin, Management, and Marketing subnets must not have access to the IT subnet.
2. IT subnet must have access to all the subnets of the net.
3. Configure users and passwords for your routers.
4. Implement a TACACS+ server to manage AAA in all your routers.

Deliverables

Your document must include

1. PLAN

1. Introduction
2. Description of the network devices that you will use in your implementation
3. The proposed topology of your network
4. The design of your classless IP addressing scheme
5. General documentation of your network, which must contain but is not limited to IP addresses of all the devices or your network. User names and passwords. Protocols and other security features. Device Name IP Address Subnet Mask Username Password IT-1 1.0.1.0 255.255.255.0 ictnwk507 Danford2021
6. (remember the name of your devices must match the name in the topology)

2. IMPLEMENTATION
   1. Screenshot of your configuration, crop your screenshot making sure all the relevant information is captured and make a small comment of what the screenshot is about (You must take screen shot of the configuration process. The #showrun command can be used in the testing phase)
   2. First, setup all the basic configuration settings (IP, DEVICE NAMES, USERNAME AND PASSWORDS…ETC)
   3. Second, test all the basic configuration works and that you have proper connectivity in your network and to the ISP
   4. Third, implement the security features you proposed in your PLAN and test them.
3. CONCLUSION
   1. In your conclusion include any problems you may include and the troubleshooting process you follow to solve them.
4. REFERENCING
   1. The Referencing requirements have changed, please follow the link below for more information https://www.danford.edu.au/wp-content/uploads/2021/02/Guidelines-for-Referencing.pdf

Get Expert help for ICTNWK542 Task 1 & 2 Assignment and many more. Plag free, 100% safe, Express delivery, Discounts. Order Online Now!

No Fields Found.